These GENERAL TERMS AND CONDITIONS (“Agreement”) are agreed to between Park Place Technologies, LLC, on behalf of itself and its affiliates (“PPT”), and the undersigned, on behalf of itself and its affiliates (“Customer”). “Party” means PPT or Customer. “Parties” means PPT and Customer. These terms and conditions apply to all sales of services (“Services”) by PPT to Customer. All sales of specific Services will be preceded by a Statement of Work (“SOW”) provided to Customer by PPT. A signed Statement of Work (“SOW”) or Customer purchase order referencing the SOW will precede all sales of specific Services.

0. Term. The term of this Agreement (the “Term”) commences on the date of execution hereof and terminates on the later of (a) sixty (60) days after written notice from one Party to the other of termination, or (b) the expiration and discharge of all obligations under any SOW(s) outstanding on the date of any such termination notice.

1. SOW Service Modifications.

a. An SOW may be modified by a change order, effective upon execution by both parties.

b. [Applicable to Hardware Maintenance Services Only] Customer may remove individual Services or Covered Equipment (defined below) from an existing SOW by giving sixty (60) days’ prior written notice to PPT. Credits resulting from Service or Covered Equipment removal will pro-rated based from the effective removal date based on a 30-day month.

2. Fees. Unless otherwise provided in the SOW, all fees are invoiced annually in advance and are payable net 30 days. In the event fees are not timely paid, PPT may (i) accelerate and demand payment in full of all amounts due, including any subsequent installment payments, and/or (ii) suspend or terminate Services. Quoted prices do not include applicable taxes or duties. Customer will be responsible for any applicable taxes or duties (e.g. sales tax, VAT, GST) imposed by any governmental authority relating to the purchase of the Services, except for any taxes based solely on PPT’s income. If Customer is tax exempt, Customer must provide a valid Tax Exemption Certificate.

3. Customer Compliance. Customer agrees to comply with all applicable laws and regulations. Customer is not named on any U.S. government list of persons or entities with which U.S. persons are prohibited from transacting, nor owned or controlled by or acting on behalf of any such persons or entities. Customer will not access or use Services in any manner that would cause any Party to violate any U.S. or international embargo, export control law, or prohibition. Customer has not received or been offered any illegal or improper bribe, kickback, payment, gift, or thing of value from any person in connection with this Agreement or an SOW. If Customer learns of any violation of the above restrictions, Customer will use reasonable efforts to promptly notify PPT. Customer represents that it has all requisite ownership, license or other rights required for PPT to perform Services under all SOWs without infringing rights of third parties. PPT is fully committed to the respect of internationally recognized human rights worldwide; Customer acknowledges that it will not use any products, services, and technology procured from PPT nor allow such products, services, and technology to be used for the violation of human rights.

4. Limited Warranty and Limitation of Liabilities.

a. PPT warrants that Services will be provided by supervised and qualified staff and will be provided in a good and workmanlike manner and in compliance with all applicable laws and regulations. THE WARRANTIES IN THIS SUBSECTION ARE THE SOLE WARRANTIES OF PPT AND THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND SUITABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


c. No legal action arising under this Agreement may be brought by Customer against PPT later than one (1) year after the claim arises.

5. Standards of PPT Hardware Maintenance Services [Applicable to Hardware Maintenance Service Only].

a. Standards. To be eligible for Service by PPT, Customer equipment must be identified on an SOW (“Covered Equipment”). All Covered Equipment must be in good working condition and meet the manufacturers’ minimum equipment configuration requirements and specifications. Any costs associated with correcting deficiencies to the aforementioned requirement(s) are the responsibility of Customer. PPT will maintain the Covered Equipment in good operating condition. Services include labor and replacement of all parts deemed
necessary for proper operation of Covered Equipment. Defective parts will remain Customer’s property and in Customer’s possession. Customer will promptly notify PPT of Covered Equipment failure and will allow PPT staff reasonable access to Covered Equipment and a reasonable time to perform the Services. Customer will maintain accurate and current logs and records concerning the operation of Covered Equipment. Services provided outside the scope of Services set forth on an SOW will be billed at PPT’s per call rates and terms then
in effect. Maintenance service requirements that exist prior to the commencement of Services are excluded from the Services unless otherwise specifically provided in the SOW. All Services are dependent upon hardware availability on commercially reasonable terms.

b. ParkViewTM. To the extent applicable, Customer’s right and license to use ParkView™ (which includes the suite of licensed BMC products, referenced herein as the “ParkView Products”) is subject to the following: ParkView Products are protected by United States copyright law and applicable international copyright treaties; Customer may not claim or assert title to or ownership of the ParkView Products (or modifications thereto), or remove or alter any copyright or proprietary notice from copies of ParkView Products; Customer may not
copy, de-compile, disassemble, reverse engineer or attempt to derive ParkView Products’ source code from object code, except to the extent permitted by applicable law; Customer may not sell, rent, lease, license, sublicense, modify, time share, outsource or transfer the ParkView Products to any third-party; Customer will use reasonable care and protection to prevent the unauthorized use, copying, publication or dissemination of the ParkView Product; and Customer may not export or re-export the ParkView Product without both the written consent of PPT and/or its licensor (as applicable) and the appropriate US and/or foreign government license(s).

c. First-Time Fix GuaranteeTM. PPT will credit one month of maintenance fees and ParkView monitoring for the affected device if a return trip is needed to correct the same issue on the same device within five (5) days. The device must be supported by ParkView and have an active maintenance contract to qualify. Credits for ParkView server clients will include both the one-month maintenance fee equivalent and one-month ParkView subscription fee equivalent. Credit will be applied to corresponding device only. For clients with contracts subject to renewal within sixty (60) days, credits will not be issued until the renewal quote is signed. All Tape Storage Products, Dell EMC Avamar, Dell EMC Centera, SuperMicro Servers (white box), Dell EMC RecoverPoint, Dell EMC Vblock, and HPE Proliant DL980G7 are excluded from this guarantee.

d. Service First. PPT is committed to customer service. In the covered territories, if Customer requests maintenance services on equipment not covered by an SOW, or outside the scope of Services identified on an SOW, PPT will provide responsive maintenance services to the extent within its capabilities. In most cases, Customer will be provided a quote and may add equipment to Covered Equipment. If not added to Covered Equipment, these additional services will be performed by PPT on a time and materials basis (which may include travel). All Service First time and materials services are subject to receipt of a Customer’s purchase order or credit card authorization and the warranty limitations and limitations on liability set forth in these Terms and Conditions.

e. Exclusions. The following are not included in the Services provided by PPT: installation, de-installation, reinstallation or moving Covered Equipment; adding, changing, removing features or options, or making functional changes to Covered Equipment; providing consumable or operating supplies or materials, including but not limited to print heads, shuttle assemblies, cables, batteries(other than mother board, system board, and cache batteries, which are included), media, toner or ink cartridges; repair of equipment damage including, without limitation, damage resulting from accident, transportation, neglect or misuse, lightning, failure or fluctuation of electrical power, air conditioning or humidity control, water, other environmental factors, telephone equipment or communication lines failure, failure of foreign interconnect equipment, or caused by maintenance services or modifications, alterations or additions of items not provided by PPT to Covered Equipment; maintenance or repair required caused by misuse, abuse or neglect, or other loss or damage from causes external to the equipment; reconditioning or factory refurbishment of equipment when normal repair and parts replacement cannot keep the equipment in satisfactory operating condition as determined by PPT; software or firmware service (including upgrades and patches) or any repair of any equipment failure caused by inappropriate software or firmware programming, system software or application software support; system engineering services, programming, and operating procedures; and maintenance or other services on equipment other than Covered Equipment. Excluded services noted above may be performed by PPT under a separate service agreement or, at PPT’s sole discretion, on a time and materials basis (which may include travel).

6. Insurance. PPT carries and will maintain during the term of

6. Insurance. PPT carries and will maintain during the term of this Agreement insurance with insurers of recognized financial responsibility against such losses and risks as are customary in connection with the provision of the Services and the Company’s business. Upon request, PPT will deliver to Customer a certificate of insurance evidencing the same.

7. Data Protection.

a. If, due to the nature of the specific Services to be provided under this Agreement (as detailed in the Equipment Schedule attached hereto), the parties hereto enter into a data processing agreement, such agreement shall prevail in the event of a conflict between this Agreement and the data processing agreement.

b. Otherwise, in the context of the provision of the Services, PPT will not access or otherwise process any personal identifiable information – meaning information relating to identified or identifiable natural persons – aside from the names and contact details of individuals employed or otherwise engaged by Customer or the customers of Customer (such as on-site contact persons and representatives), as strictly necessary to provide the Services.

c. In so doing, PPT will act as a data processor on behalf of Customer and/or the customers of Customer, and hereby undertakes to comply with all obligations applicable to PPT under any and all data protection laws, including Regulation (EU) 2016/679 – the General Data Protection Regulation – regarding the safeguarding and lawful processing of Personal Data which may be applicable to the provision of the Services.

8. Confidentiality. If a Party receives from the other Party written information which is marked “Confidential” or “Proprietary” or with a similar marking, or if a Party receives information the receiving Party knows or should know is confidential or proprietary, the receiving Party agrees not to use such information except in the performance of this Agreement, a SOW or the Services. Moreover, the receiving Party agrees to treat such information in the same manner as it treats its own confidential information and agrees to use commercially reasonable efforts to protect the confidentiality of such information. The obligation to keep information confidential does not apply to any such information that has been disclosed in publicly available sources or is in the rightful possession of the receiving Party without an obligation of confidentiality. In the event the receiving Party is required to disclose the confidential information by court order or operation of law, the receiving Party hereby agrees to provide notice to the disclosing Party prior to the required disclosure. The confidentiality obligations in this paragraph apply during the term of this Agreement for a period of two (2) years after termination or expiration. The Parties will return or destroy confidential information of the other upon request.

9. General.

a. Amendment. This Agreement may not be changed, modified, or amended except in writing signed by both Parties, and any such change, modification or amendment must expressly reference this Agreement.

b. Entire Agreement. This Agreement, together with the SOW, contains the entire understanding of the Parties with respect to the subject matter hereof and supersedes all prior agreements between the Parties. In the event of a conflict between the SOW and this Agreement, the SOW controls. For clarity, the Parties specifically agree that this Agreement and the SOW supersede, and render void any contrary terms and conditions contained in a purchase order, sales acknowledgment or other instrument, agreement or document unless such order, acknowledgment, instrument, agreement or document is entered into after the Effective Date, signed by both Parties hereto, and expressly references this Agreement.

c. Termination for Breach. Either Party may terminate an SOW by written notice to the other Party upon a material breach by the other Party of obligations under this Agreement and/or the applicable SOW.

d. No Implied Waivers. The failure of either Party at any time to require performance by the other of any provision herein will not affect the right of such Party to require performance at any time thereafter, nor will the failure of either Party to take action regarding a breach of any provision hereof be taken or held to be a waiver of the provision itself.

e. Governing Law and Dispute Resolution. In the event of any controversy or claim arising out of or relating to this Agreement, the parties agree to first consult and negotiate with each other and, recognizing their mutual interests, attempt to reach a satisfactory solution. If they do not reach settlement within a period of 60 days, then, upon notice by any party to the other(s), unresolved controversies or claims will be finally settled by arbitration (i) if in the U.S., in Cleveland, Ohio, under the Commercial Arbitration Rules of the American Arbitration Association and applying the laws of the State of Ohio, and (ii) if outside of the U.S., in the nearest principal business location of PPT, under the Rules of Arbitration of the International Chamber of Commerce and applying the commercial laws of the jurisdiction of the contracting PPT entity, in either case by one arbitrator appointed in accordance with the applicable rules. The language of the arbitration will be English. The judgment on the award rendered by the arbitrator shall be binding and may be entered in any court having jurisdiction thereof.

f. Force Majeure. Neither Party will be liable for failure to fulfill its obligation under this Agreement or an SOW if such failure is due to causes beyond a Party’s reasonable control, including, but not limited to, acts of God, pandemics, epidemics, or other widespread health impairments, government advisements or orders, including but not limited to, travel and movement restrictions or border closings, acts of terrorism, man-made or natural disasters, material shortages, strikes, delays in transportation or force majeure. The time for performance of any such obligation will be extended by the period lost due to such cause, with PPT agreeing to resume work as soon as it is safe and PPT is reasonably able to do so.

g. Severability; Headings. Any provision of this Agreement which is determined to be prohibited or unenforceable by a court of competent jurisdiction will be ineffective only to the extent of such prohibition or unenforceability and will be severed without invalidating the remaining provisions hereof or otherwise affecting the validity or enforceability of such provision. The headings used herein are for the convenience of the Parties only and will not affect the interpretation of this Agreement.

h. Notice. Notice to PPT will be given in writing, addressed to Park Place Technologies, 5910 Landerbrook Drive, Mayfield Heights, OH 44124-6500, USA, Attention: Office of General Counsel. Notice to Customer will be given in writing, addressed to Customer at the address set forth in the applicable SOW or the last known address of Customer. Notice will be deemed given at the time it is delivered or presented for delivery to the addressee listed above.

10. Non-Solicitation. Customer acknowledges and agrees that during the Term and for one (1) year after termination of this Agreement, it will not hire or solicit to hire any of PPT’s employees, contractors, or agents directly servicing Customer during the Term without PPT’s prior written consent, excluding solicitation or hiring by means of general employment advertising or postings.

11. Counterparts. This Agreement may be signed in one or more counterparts, each of which shall be deemed a duplicate original, binding on the parties hereto notwithstanding that the parties are not signatory to the original or the same counterpart. Counterpart signatures of this Agreement that are manually signed and delivered by PDF transmission; by a uniquely, marked computer-generated signature; or by other electronic methods, will be deemed to constitute signed original counterparts hereof and will bind the parties signing and delivering in such manner and will be the same as the delivery of an original.